Double hung windows consist of two separate window panels, both of which slide up and down. Typically, the window is opened by sliding the bottom panel upwards.

 

Follow the Step by Step Instructions Below to Properly Guard Your Double Hung Windows
For technical assistance, contact Automatic Specialties, Inc. at (800) 445-2370

 

1)  Measure the width inside of the window frame. (Figure 1-1)


2) Measure the depth of the window frame where the posts will be mounted (inside right and  
left sides of window frame).
  • If the depth of the window frame measures less than 3/4 inches, the guard will need to be mounted on the outside of the window frame (on the window trim or wall). Add at least 1-1/2 inches to the inside window frame measurement. (The extra 1-1/2 inches is the width of both side posts)
 

3) Once you have determined the above measurements, you can request sizing and pricing information.

 

 

4) Once you receive your window guard, install it following the included instructions.

 

Cautionary Note
There should be no more than a 4-inch opening anywhere in the guarded area. This includes the area between the top bar on the window guard and the bottom of the opened window panel. (Figure 1-2)

 

 

Safety Notes
     ·Before installing, verify building and fire codes are not being violated. Contact local building code or fire department for 
      specific codes.
     ·Screws should be anchored firmly into a solid stud or frame material to achieve maximum safety.
     ·This window guard is intended to protect against potential window falls by children age 5 & under.
     ·Parents, child-care custodians and older children must understand the proper operation of this guard in case of 
      emergency.
     ·Window guards are designed to be a deterrent against accidental window falls. This product is not intended as a  
      substitute for proper adult supervision.
     ·Guardian Angel Window Guards are not meant to protect against intruders.

 


Possible Fall Hazard

Young children may fall out of the window if the window guard is not installed correctly.
     ·Check to make sure there are no openings in the guarded area more than 4 inches.
Young children may fall out of the window if installation instructions are not followed.
     ·Use recommended materials and techniques.
     ·Make sure window guard is securely attached to the window frame.
     ·make sure the window frame is in good condition.

 

Download Measuring Instructions

 

 

 

ASI Home | Guardian Angel Window Guards | Wine Racks | CNC Wire Forming
Metal Stampings | Welded Products | Sandbag Holders


BBBOnLine Reliability Seal

© 2004 Automatic Specialties, Inc. /  All Rights Reserved
Last updated 03/09/2004
For product information contact
  sales@auspin.com
For technical information contact  engrng@auspin.com
For questions concerning this website contact  webmaster@auspin.com